产品特性:
卷材粘结剂
适用广泛,施工便利
超强粘结力
无溶剂,环保型
涂布量大,用量经济
施工方法:
先用A2,A3或B1锯齿刮刀均匀地涂布。不需要再涂布过多的粘结剂,只要能覆盖就行,该产品在可工作时间内进行粘贴。
根据基层的孔隙率和施工现场的气温和温度,晾置约20分钟时间后,然后铺上地板用50公斤到70公斤重的金属滚轮压实地板,排除地板下的空气,可达到很好的效果。
铺设地板前请参阅地板供应商的相关施工资料。
注意事项:
要确保良好的通风和对施工最佳的温度和湿度条件。低温或高温度会明显地延长干燥时间或推迟粘结强度的发展。在粘结剂的强度还未完全达到前,要防止过度使用。
Features:
Bonding
Agent of Coiled Materials
widely
used and easy for construction
strong
bonding force
non-soluvent,
environmental protective
with
large coating weight and economical
Construction
Method:
Coat
by A2, A3 or B1 sawtooth blade. Use a proper amount to cover the part needed,
no need for more.
Lay
it for about 20 minutes according to porosity, weather and temperature, and
press the floor with metal roller about 50kg to 70kg to remove the air remained
under the floor supplier before floor laying.
Notices:
Ensuer the good ventilation, temperature and
humidity for construction. Lower or higher temperature may delay the time for
drying or influence the bonding strength Don't overuse it before the bonding
strength is not reached.